The Replica Watch In Discount first optimization involved the movement chassis (baseplate and gear-train bridges). To reduce friction due to the pivoting of the arbors, these components were made from a high-tech ceramic. As a result, it was possible to eliminate 11 out of 47 jewels. Thanks to an extremely low friction coefficient, the arbors can pivot directly in the baseplate and bridge holes without any wear or energy loss and also without any lubricant.
Another energy-loss area in a vertical coupling-clutch chronograph mechanism is the set of one arbor and two wheels (2 mm in diameter) responsible for connecting the base movement and the wheel bearing the sweep-seconds hand (chronograph wheel and pinion). This set displays a certain play that can lead to jerking that is generally eliminated by using a “friction spring” at the cost of a 15% energy loss. To avoid this, Breitling equipped the two wheels with elastic toothing molding the shape of the opposite teeth, by means of a nickel-phosphorous structure.
The increase of the power reserve from 70 to 100 hours (a 45% gain) is not only practical for the owner of the replica watch which does not need to wind it for four days even if not worn, but it is also improves precision. In fact, the higher the power reserve, the less the force of the spring dwindles during the first 24 hours, so enhancing regularity of the movement rate.
These engineers and replica watchmakers, operating as the Chronoworks department, reworked the Manufacture Calibre 01 and incorporated five major innovations serving to enhance the movement performance and increase its power reserve from 70 to 100 hours.Breitling has a dedicated team of movement experts in charge of developing and testing advanced technical solutions that can possibly be introduced on series-produced models.
The new high-performance movement is now presented in the Breitling Superocean Héritage Chronoworks Replica, a 100-piece limited edition interpreted in a bold all-black version with a 46 mm matt ceramic case, water resistant to 100 metres / 330 feet, which displays the Chronoworks movement and its black oscillating weight through the transparent caseback.
The pointed hour-markers and the distinctive hands of the matt black dial recall the 1957 Superocean, one of the first deep-water-resistant wristreplica watches of the brand.
The calibre has been fitted with three wheels (centre wheel, third wheel, fourth wheel) in silicon, a material twice as light as normal and that thus makes it easier to set the movement in motion again, a phase which absorbs lot of energy.
Starting from the Manufacture Calibre 01, a selfwinding chronograph movement featuring a column-wheel construction, a vertical coupling-clutch and an over 70-hour power reserve, the Chronoworks tem developed five technical advancements (relating to the choice of materials, the geometry of the parts, etc.) serving to reduce friction as well as dynamic efforts at all stages with the goal to enhance the energy efficiency of the mechanisms.
This serves to reduce weight and thus inertia, as well as eliminating the need for pallet jewels.The escapement – the part of the movement where most of the energy losses take place – has been enhanced by crafting wheel and lever in silicon. To ensure more efficient transmission of the energy from the barrel, the geometry of the two components was revisited delivering an overall 42% gain in efficiency.
In fact, by combining a nickel felly (ring) with a cross (spoke) made of brass, the balance can take advantage of the metal’s expansion/contraction to modify the inertia.The variable-inertia balance, adjustable via four tiny gold weights situated around the rim, is insensitive to temperature variations hence maintaining the same rating precision in every circumstances. When the temperature drops, the cross contracts and pulls the felly towards the centre, thereby reducing inertia. When the temperature rises, the cross expands and pushes the felly towards the exterior, thus increasing inertia.